MG Co Ltd AUTHORISED DISTRIBUTOR IN MALAYSIA

LIGHTNING SURGE PROTECTOR FOR
THERMOCOUPLE USE
(ultra-slim)

Functions & Features

• High discharge current capacity 20 kA (8 / 20 μs), 1 kA (10 / 350 μs)
• Ultra-thin 7-mm-wide module can be mounted in high density
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and

Lightning Surge Protectors for
Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR
STANDARD SIGNAL LINE & PULSE USE

Functions & Features

• Designed specifically for 4 – 20 mA DC and pulse signal line including both 4-wire and 2-wire transmitters
• Absorbs surges only without affecting instrumentation

Lightning Surge Protectors for
Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR
FOR THREE-PHASE POWER SUPPLY

MAT 2

Functions & Features

• Connected in parallel between the power and earth lines regardless of load current
• Applicable to single phase 2/3-wire and threephase 3/4-wire

Lightning Surge Protectors for
Electronics Equipment M-RESTER

LIGHTNING SURGE PROTECTOR FOR ETHERNET
(PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T)

Model : MDCAT

Functions & Features
• Designed specifically for Ethernet network
• Conforms with 1000 Base-T, PoE and PoE Plus
• LAN

LIGHTNING SURGE PROTECTOR
FOR POWER SUPPLY USE
(DC power use)

Model : MDH

Functions & Features
• Designed specifically for DC power supplies up to 5 amps
• Absorbing surges only without affecting instrumentation signal
• Indicator LED for surge absorber failure
• Fuse provided for

Compact Plug-in with OEL display M1E Series MODEL : M1E-BS

M1E Series are 2 or 4-channel Compact Signal Conditioners with OEL display.

Power Transducers

MODEL: LTPE

• AC current up to 5A, 
• AC voltage up to 550V.

Compact Plug-in Mini-M Series

OEL display Type  12 models M2E Series

COMPACT PLUG-IN SIGNAL SPLITTERS The W2 Series Signal Splitters provide two isolated outputs of independent ranges.

• W2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.

Ultra-Slim M6 Series

Ultra-slim, Space saving, Low power consumption.
High performance transmitters with wide selection of input and output ranges.

• Selectable connection method Tension-Clamp, Screw terminal or Euro terminal.

M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.
  Low Profile M5-UNIT Series M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.

Low Profile Signal Splitters W5-UNIT Series

W5 Series Dual Output Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.

Four-port isolation between the input, output 1, output 2, and power supply

PC Programmable; "ONE-STEP CAL".

Programming Without Needing a PC is also available.

• Easy and precise field configurable I/O ranges
• Enhanced PC Configurator Software
• 1500V AC isolation
• 18 mm (0.71”) thin profile DIN rail mounting

M-System Hybrid IC Isolation Amplifiers 20 Series Isolation Amplifier (4 channels, input isolation)

Functions & Features
• Being used for printed wiring board installation
• Up to 2000 V isolation between input to output or power input
•Isolation on 4 input channels
• Small installation area in printed wiring board

Dual Output Super-mini Signal Conditioners Pico-M Series

Wide Variety of I/O Modules

• Ultra-small size thanks to surface-mounted components with low heat generating design
• 4-way isolation
• Continuously selectable input ranges
• 4-20 mA 2nd output available
• Rotary and linear actuators for valve and flow control

Field Configurable

• Local LED display indicates input in engineering unit
• The display helps programming with the front ITEM/DATA buttons.
• 2000V AC isolation

• LCD display optional
• 2000V AC isolation

Plug-in

• Low cost
• Wide selection of power transducers