PC PUMP DISTRIBUTOR SUPPLIER IN MALAYSIA

Self-priming pump Type WANGEN Xpress The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place.

The WANGEN progressing cavity pump KB-S GG is one of the basic products of WANGEN PUMPEN. One of the benefits of this pump is clearly the fewer parts within the individual assemblies. The KB-S GG is of cast iron and has a block housing (the drive is coupled directly to the pump housing).

SPECIFICATION Max. flow rate (m³/h) 525050075010001250 Max.

The WANGEN progressing cavity pumps of the KB-S serie are, in contrast to the KL-S serie, equipped with a block housing. There, the drive is coupled directly to the pump housing, which is ideal for normal pump operation or for small conveyed volumes. The pump conveys viscous and abrasive mediums.

SPECIFICATION Max.

The pumps is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media).

SPECIFICATION Max. flow rate (m³/h) 425050075010001250 Max.

The WANGEN progressing cavity pump of type GL-S is particularly well suited to umbilical hose systems. Large distances and height differences are mastered easily. It may be used as a stationary pump or mobile pump, attached to a slurry tanker or chassis. The comprehensive range of pumps available make them a product for universal use.

The integrated winding protection mechanism of the PTO shaft pump WANGEN GL-F prevents fibers from winding around the joint and joint connections. The large inspection and cleaning openings on the suction housing allow an easy pump access.

The WANGEN progressing cavity pump Type A has swivel pushers inside the suction chamber that switch the pump from suction to pump mode. The pump is not sensitive to foreign objects and the deposition of foreign objects in the suction housing is not possible. In addition, hollow rotors ensure quiet operation.

SPECIFICATION Max.

With a specially-developed milling screw, you can mix the solids that are to be added with the separately added liquid and convey it into the desired containers.

The hygienic hopper feed pumps of the series WANGEN KL-RF have an inspection cover, a maintenance-free mechanical seal, which is independent of the rotation direction, and the dis-charge nozzle has a self-emptying design. The KL-RF is available with different rotor/stator geometric forms (S-, L- and H shapes).

SPECIFICATION Max.

Pumps of the series KL-RL allow almost pulsation-free pumping of mediums. Depending on the medium to be pumped, the pump can be operated with heating or cooling options, and a variation using an attachable hopper is also possible.

SPECIFICATION Max. flow rate (m³/h) 6525050075010001250 Max.

Optimal substrate preparation and low wear increase the efficiency of your system.

The best and unique solution for gently feeding of high-viscosity media: The hygienic and patented add-on to the WANGEN Twin screw pump. A add-on module of the WANGEN Twin NG with hopper and screw conveyor. 

SPECIFICATION Max. flow rate (m³/h) 1025050075010001250 Max.

The new generation of the WANGEN Twin NG screw pump is part of the hygienic pumping solutions from WANGEN and was designed to reliably pump low to highly viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required.The hygienic pump for food and beverages, chemicals and cosmetics.

The WANGEN MX-F is a hygienic progressing cavity pump for emtying drums and vessels that contains high viscous mediums. The pump is therefore mounted on a plate. Both, pump and plate, is then pressed into the medium. The so displaced material feeds the pump through a hole in the plate.

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation continuous conveying of media is independent of the pressure and viscosity.

SPECIFICATION Max.