AANDERAA AUTHORISED DISTRIBUTOR SUPPLIER PROVIDER IN MALAYSIA

The SeaGuard current meters are multiparameter platforms with vast possibilities to measure currents, waves, and water quality

The SEAGUARD® is the core module used in small and medium sized underwater observatories.

The SeaGuardII DCP (Acoustic Doppler Current Profiler) measures currents and can be extended with wave direction, oxygen, conductivity, turbidity, temperature, and serial sensors.

It features innovative development of the acoustic profiling capacity and an exceptional ability to collect high quality current information on moving and tilting moorings.

Profiling Current Meter and Wave Profiling Current Meter and Wave - The optimal solution to measure current, speed, direction, and water quality in one instrument.

The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler able to measure directional wave parameters and currents from a bottom mounted installation.

A self-recording dedicated current meter with Bluetooth for communications and data retrieval - now with the possibility to integrate a pressure sensor!

The RCM Blue is a self-recording Current Meter which also measures water temperature in salt or fresh water, and a battery container with battery capacity up to 70Ah. .

The Aanderaa Current Sensors are available in a profiling and a single-point version with three depth ratings. We offer Doppler Current Profiler Sensor, Doppler Current Sensor and the In-line ZPulse Doppler Current Sensor.

The Doppler Current Profiler Sensor (DCPS) is a medium-range, 600kHz current profiler smart sensor.

The Aanderaa SEAGUARD® Sensor String Systems are complete and flexible subsea observatories for measurements of e.g. dissolved oxygen, conductivity, temperature, current, pressure and tide.

SEAGUARD® String Logger
The Aanderaa SEAGUARD® String Logger is the basic module of the SEAGUARD® Sensor String System.

The acoustic based wave instrument, SeaGuardII DCP Wave, the swiss army knife of ADCPs with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument.

Measure pressure based Waves with the Aanderaa Wave Sensors- compact fully integrated sensors for measuring wave and tide conditions

The 5218 wave sensor is designed to be mounted on the Aanderaa SeaGuard top-end plate or connected to SmartGuard using AiCaP CANbus or in other measurement systems using the RS-232 interface.

Accurate Motion Based wave measurements are critical in applications such as offshore wind farm development, navigation, cable laying, breakwater building, and bridge construction.

Waves also result in continuous loads on marine structures, including docks, moorings, and offshore platforms.

Motion Based Waves are challenging to measure.

The MOTUS (movement in Latin) Wave Buoy is a perfect solution for collecting environmental data in coastal areas.

Collect reliable environmental data with MOTUS Wave Data Buoy.

The MOTUS (movement in Latin) Buoy is a perfect solution for collecting environmental data in coastal areas for all-year deployments.

Turn your buoy into an intelligent data-collecting platform with the Aanderaa MOTUS Wave Stand-Alone SensorThere are numerous ways of measuring Ocean Waves. At Aanderaa, we focus on three measurement types: pressure, acoustic, and motion. In this section, we cover the motion-based sensors in the MOTUS family.

Salt Water Conductivity sensors from Aanderaa are compact, fully integrated sensors for measuring water conductivity. Measuring conductivity of salt water is a key parameter for in-situ measurements of several fundamental physical properties of water.

The Aanderaa Current Sensors are available in a profiling and a single-point version with three depth ratings. We offer Doppler Current Profiler Sensor, Doppler Current Sensor and the In-line ZPulse Doppler Current Sensor.

The Doppler Current Profiler Sensor (DCPS) is a medium-range, 600kHz current profiler smart sensor.

The Aanderaa Oxygen Optodes were the first to measure dissolved oxygen for years without drift  - now it is even more stable! Below you can read more about the oxygen optode working principle

Since oxygen is involved in most of the biological and chemical processes in aquatic environments, it is a crucial parameter to measure.

Aanderaa pressure sensors are compact, intelligent pressure sensors designed for use on Aanderaa Data Instruments dataloggers as well as in other measuring systems.

In most measuring systems used in the sea, pressure is a vital parameter. For moored instruments the pressure can be used for determining the actual depth of the instrument.

Aanderaa water temperature sensors are compact, intelligent sensors designed for use on Aanderaa's Dataloggers and as stand-alone units.

A compact fully integrated sensor for measuring the water temperature.

The Aanderaa Tide sensors are compact fully integrated sensor for measuring the tide conditions.

Tide Sensors 5217/5217R are compact fully integrated sensors for measuring the tide conditions. The sensor is designed to be mounted on the Aanderaa multiparameter SeaGuard® Platform or via cable connected to SmartGuard datalogger.

The Aanderaa Turbidity Sensors detects infra-red light scattered by particles suspended in water.

The New Aanderaa Optical Turbidity Sensor 4296 will replace the existing turbidity sensor, previously offered by Aanderaa.

Measure pressure based Waves with the Aanderaa Wave Sensors- compact fully integrated sensors for measuring wave and tide conditions

The 5218 wave sensor is designed to be mounted on the Aanderaa SeaGuard top-end plate or connected to SmartGuard using AiCaP CANbus or in other measurement systems using the RS-232 interface.