Name: TOKYO KEIKI PORTABLE ULTRASONIC FLOWMETER UW-30P
Brand: TOKYO KEIKI
Availability: InStock

TOKYO KEIKI PORTABLE ULTRASONIC FLOWMETER UW-30P

TOKYO KEIKI PORTABLE ULTRASONIC FLOWMETER UW-30P

Brand: TOKYO KEIKI

Category: Hot Items, FLOW AND LEVEL MEASUREMENT

PORTABLE ULTRASONIC FLOWMETER UW-30P TOKYO KEIKI AUTHORIZED DISTRIBUTOR IN MALAYSIA

TOKYO KEIKI PORTABLE ULTRASONIC FLOWMETER UW-30P

UW-30P PORTABLE ULTRASONIC FLOWMETER

PORTABLE ULTRASONIC FLOWMETER UW-30P

The time it takes to propagate ultrasonic pulses in a liquid varies according to flow velocity. This principle is utilized by ultrasonic flowmeters which provide signal output proportional to the flow rate. The UW-30P portable flowmeter can measure flow by simply positioning the transducers on the outside of pipes.

The UW-30P flowmeter supersedes our model UFP-20 or UFP-10 and offers a more compact design with additional functions such as pipe thickness measurement and liquid ultrasonic velocity measurement.

The UW-30P is a high-performance flowmeter which is simple to use. The UW-30P incorporates an onboard DSP which carries out such functions as flow calculation and data processing in metric or inch units.

The UW-30P can be applied to pipe diameters from 13 ~ 5000 mm and is ideal for use with liquids such as clean water and wastewater.
Three power sources (Li-Ion battery, AC, DC supply) allow flexibility to match conditions of the site and optional equipment such as optional transducers, extension cable and temperature input for heatmeter function enhance the range of applications.

Specifications :
Measurement :	Applicable Fluid	Homogeneous and sonically conductive fluids (water, waste water, industrial water sea water, pure water, oil, ethylene glycol-water solution etc)
	Range	Converted to flow velocity: -30 m/s to +30 m/s
	Method	Ultrasonic pulse transit time difference method
Pipe & Flow Condition :	Diameter	DN13mm ~ DN5000mm (*1)
	Materia	Materials which allow stable transit of ultrasonic waves such as steel, stainless steel, castings, ductile casting, PVC, PE, FRPM, GRP, HDPE etc. (Note: Applicable diameters may vary with material.)
	Turbidity	10000 mg/L or less
	Lining	None, tar epoxy, mortar, cement mortar etc. Note: The lining must be in close contact with the original pipe
	Flow Condition	Fully developed and rotationally symmetrical flow profile required.